View Single Post
Old 06-06-2006, 05:15 PM   #13
Greg_Sorensen
Rookie
 
Join Date: May 2006
Posts: 11
Default Re: Enabling Joystick causes view to just look to

Ok,

I set the pitch and yaw to -0.022 and 0.022 and left everything else as I described above. Now with the pitch at a negative number the view slowly moves down till I'm looking at the floor.
Changing the yaw didn't have an effect for looking side to side.
I tested some other values between 1 and -1. Seems that if it is positive it looks up and if negative it looks down. Seems to me like this is some delta or offset value to apply to pitch and yaw inputs if they are set to 0, to allow the joystick to control the action. It's like there is supposed to be a toggle that changes the behavior of the x/y axis, from movement vs. looking around and that toggle isn't getting changed.
Greg_Sorensen is offline   Reply With Quote